Maureen Kohnke

Difference between Monotonic and Monotonic Line fills? - Bambu …

www.bing.com › ck › a

Mar 13, 2023 · What’s the difference between the surface fills “Monotonic” and “Monotonic Line” ? The latter appears to be a Bambu extension, and - according to the source code as FillMonotonicLineWGapFill - is its own thing, inheriting from Fill rather than inheriting from FillMonotonic or FillRectilinear as one might expect.

Strength advanced setting - Bambu Lab Wiki

www.bing.com › ck › a

Angle for sparse infill pattern, which controls the start or main direction of the line. This parameter also adjusts the direction of all infill lines, including top surface, bottom surface, sparse infill, and internal solid infill (except bridge).

Force top surfaces to be fully covered - Bambu Studio - Bambu …

www.bing.com › ck › a

Oct 27, 2024 · However, that results in the top surface layer pattern to be filled unevenly, travelling back and forth to fill gaps left behind. Also, the walls for the lettering are printed just on the edge of the solid infill layer, which makes them not so stable.

How to fix or move this line on the Top surface of a print

www.bing.com › ck › a

Apr 12, 2023 · How do I get rid of this line on the top surface? I’ve tried different Top Surface Pattern like Aligned Rectilinear, Rectilinear, Monotonic Line. Stepping through the print slider on the bottom of Bambuslicer I can’t see…

Bambu Studio Top Layer Settings: Achieving a Perfect Finish

www.bing.com › ck › a

Sep 26, 2024 · Conclusion Mastering the top layer settings in Bambu Studio is key to achieving professional-grade 3D prints with smooth, polished surfaces. By adjusting the number of layers, thickness, speed, and infill overlap, you can optimize the top surface quality based on your specific needs and material.

Bambu Studio advanced quality settings - Bambu Lab Wiki

www.bing.com › ck › a

For the top surface, the actual flow ratio is calculated by multiplying the original flow ratio by this factor. This factor affects the amount of filament used for the top solid infill.

Make all solid infill monotonic when Top surface pattern is Monotonic Line.

www.bing.com › ck › a

Jun 24, 2023 · The top surface can have poor quality when using Monotonic Lines as the previous layers show through since it is not done as monotonic. If you select Monotonic as the Top source pattern, then all solid layers below it are also printed as...

Are you having issues with terrible top layers? - Bambu Lab …

www.bing.com › ck › a

Apr 30, 2024 · There are many fixes and patches out there from the community, many ways to try and solve this from using z-hop on retraction in filament settings, changing your surface pattern to monotonic, turning off “reduce infill retraction” and even doing a factory reset on your machine - but none seem to be perfect fixes even when you use them all.

Weird overlapping layer lines on solid infill layers - Bambu Studio ...

www.bing.com › ck › a

Nov 26, 2024 · This problem in Bambu Studio seems to be caused by the Rectilinear infill in the Internal solid infill pattern parameter. Change it to Monotonic or Monotonic line.

Why my Top layer finish is really bad? - Bambu Lab Community …

www.bing.com › ck › a

Feb 22, 2023 · I don’t think this is your issue, but I found that 3 top layers is too little and infill patterns would show through, so now I use 4 top layers (which I think was the default on my MK3S+ and other printers anyway). I also changed to …

Top/Bottom Shell | Creality Wiki

www.bing.com › ck › a

The monotonic fill pattern features uniform lines, resulting in a smoother surface compared to rectilinear fill, although both have consistent infill patterns. In some corners where paths may need to be interrupted, the monotonic fill pattern seeks the optimal path to connect interrupted sections, creating a continuous route.